How to calculate
Divide each fence run into bays at or below maximum spacing. Count each run’s two terminal posts and subtract duplications at shared corners. Multiply fenced length by strand count where applicable, apply extra allowance, and round up to complete rolls. Add materials, gates, installation, and fixed costs.
Worked example
Use Fence material Individual wire strands · Uninterrupted fence lengths in feet, one per line 320 / 320 / 250 / 250 · Maximum post spacing (ft) 12 · Shared end posts counted twice 4 · Parallel strands 5 · Material length per roll (ft) 1320 · Extra material allowance (%) 5 · Cost per roll (USD) 110 · Cost per intermediate post (USD) 9 · Cost per end or corner post (USD) 36 · Number of gates 1 · Each gate with hardware (USD) 210 · Install labor per fenced foot (USD) 0.9 · Braces, fittings, and fixed costs (USD) 120. The result is ≈ 2878 USD.
Input and result notes
Split runs at changes in direction and gate openings. Exclude the widths of those openings. Roll totals assume material can be allocated across all runs. Bracing and safe wire spacing depend on the fence system and livestock.
University of Georgia Extension farm fence planning